Suunto Vyper User Manual download pdf (Page 30)

WARNING!

IF YOUR DIVE COMPUTER IS INSTALLED

IN A CONSOLE, DO NOT EXPOSE THE PRES-

SURE GAUGE TO ANY GAS MIX CONTAIN-

ING MORE THAN 40% OXYGEN! Enriched air

with greater oxygen content may present a risk of

ﬁ re or explosion and serious injury or death.

DEFAULT NITROX SETTINGS

In the NITROX Mode, when set to standard air

(21% O

), the instrument can be used as an air dive

computer. It remains in this air mode until the O

setting is adjusted to any other percentage of oxygen

(22% - 50%).

NOTE! The computer will automatically revert to

the air (21% O

) setting when a new dive series is

started, if it is not set to any other mix during the

last two hours. When the oxygen percentage is set

for air, the computer will retain this setting.

Manually entered values for oxygen percentage are

retained for about two hours after the setting if a dive

series has not started. In case a dive series is started,

the set value is retained until a new dive series is

started or a new value is entered manually.

The default setting for maximum oxygen partial

pressure is 1.4 bar, however you are able to set it

between the range of 1.2 - 1.6 bar.

Fig. 3.20 Nitrox display. The

maximum depth based on set

% (21%) and PO

(1.4 bar) is

54.1 m [177 ft].

Fig. 3.21 Surface display in the

NITROX Mode.

PO2

O2%

OLF

TIME

DIVE

OLF

O2%

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 85 86

No comments

Suunto Vyper User Manual Page 30