Suunto Vyper User Manual download pdf (Page 54)

4.3.1.3. Maximum Depth Alarm

Setting [3 MAX DPTH]

You can set one depth alarm in the dive computer.

To enter the Maximum Depth Alarm Setting select

MODE- 3 SET- 1 SET DIVE- 3 MAX DPTH (Fig.

4.29).

The depth alarm is set to 40 m [131 ft] at the factory,

but you are able to adjust it according your personal

preference or switch it off. The depth range can be set

from 3.0 m to 100 m [9 ft to 328 ft] (Fig. 4.30).

4.3.1.4. Nitrox/Oxygen Setting

[4 NITROX]

If set to the NITROX Mode, the correct oxygen per-

centage of the gas in your cylinder must always be

entered into the computer to ensure correct nitrogen

and oxygen calculations. In this mode also the oxygen

partial pressure limit can be set. The dive computer

calculates the equivalent allowed maximum depth

based on the set parameters.

To enter the Nitrox/Oxygen Setting Mode select

MODE- 3 SET- 1 SET DIVE- 4 NITROX (Fig.

4.31). The default oxygen percentage (O

%) setting

is 21% (air) and oxygen partial setting 1.4 bar (PO

)

(Fig. 4.32).

Fig. 4.29 Maximum Depth

Alarm Setting Mode.

[3 MAX DEPTH].

Fig. 4.30 Setting The Maxi-

mum Depth Alarm. Press

the scroll buttons to change

the alarm on/off and to set the

maximum depth value.

Fig. 4.31 Nitrox/Oxygen Set-

ting Mode. [4 NITROX].

Fig. 4.32 Setting Oxygen Percentage and Partial Pres-

sure. The equivalent maximum depth is 32.8 m [107 ft].

Press the scroll buttons to change the oxygen percentage

and to set the oxygen partial setting value.

SELECTSELECT

MAX

SELECTSELECT

O2%

PO2

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 85 86

Comments to this Manuals

No comments

Suunto Vyper User Manual Page 54

Comments to this Manuals

Related products and manuals for Computers Suunto Vyper