Suunto Vyper User Manual download pdf (Page 16)

TIME

DIVE

TIME

At this time, perform your precheck making sure

that:

• the instrument operates in the correct

mode and provides a complete display

• the low battery indicator is not on

• the altitude and personal adjustment

settings are correct (AIR and NITROX

Modes)

• the instrument displays correct units

• the instrument displays correct tempera-

ture and depth (0.0 m [0 ft])

• the buzzer beeps.

And if set to NITROX mode, make sure that:

• the oxygen percentage is adjusted accord-

ing to the measured enriched air blend in

your cylinder

• the partial pressure limit of oxygen is set

correctly.

The dive computer is now ready for diving.

NOTE! The surface interval time is not shown

before the ﬁ rst dive.

After activation of the Dive Mode or after the dive

has ended, the instrument will automatically switch

to show the time keeping display within 5 minutes to

conserve the battery power, if you do not press any

buttons or if you don’t start a dive.

Fig 3.4 Startup IV. The Surface

Mode: The depth and dive time

are zeros (as no dives have yet

been made), and the tempera-

ture is 20°C [68°F].

Fig. 3.3 Startup III. The Gauge

Mode.

Fig. 3.5 Low Battery Warning.

The battery symbol indicates

that the battery is low and

battery replacement is recom-

mended.

TIME

DIVE

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 85 86

Comments to this Manuals

No comments

Suunto Vyper User Manual Page 16

Comments to this Manuals

Related products and manuals for Computers Suunto Vyper