Suunto OCTOPUS II User Manual download pdf (Page 20)

When the TIME/MODE and COM contacts are touched for over three seconds, the display will start to scroll through the following

modes. Lift your fingers when the desired mode is displayed:

Logbook memory: at LOG the logbook memory is accessed.

Dive history memory: at HIS the history memory is accessed.

Personal/altitude adjustment setting: at Alt the personal and/or altitude adjustment can be set.

Time setting: at Set the time and date can be adjusted.

Return: you can at any time exit the above modes by touching all three contacts at the

same time. First make contact between the PLAN/ON and TIME/MODE

contacts, e.g. by covering both contacts with your right thumb. Without

lifting your right thumb, touch the COM contact with your left thumb.

Alternatively, you can exit the modes simply by submerging the dive computer

in water.

You may sometimes encounter problems in using the contacts, or the instrument may activate on its own. The reason for this

is probably contamination or invisible marine growth that may create an unwanted electric current between the water contacts.

It is therefore important that the dive computer be carefully washed in fresh water after the day’s diving is completed. The

contacts can be cleaned with a soft pencil eraser.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 65 66

No comments

Suunto OCTOPUS II User Manual Page 20