Suunto MOSQUITO User Manual download pdf (Page 49)

Fig. 3.23. Oxygen partial

pressure and OLF displays.

There is an audible alarm and

the last segment of the bar graph

starts to blink as oxygen partial

pressure is greater than 1.4 bar

or set value, and/or the OLF has

reached 80% limit. When OLF

has reached 100%, all segments

starts to blink. If the OTU value

is higher than the CNS value, the

lowest segment blinks.

3.2.2.3. OXYGEN DISPLAYS

If set to EAN mode the NITROX display, with all

labeled oxygen information, is shown immediately after

activation. The nitrox display shows (Fig. 3.21.):

• oxygen percentage, labeled with O

%, is

shown in the left side of the lower display

• set oxygen partial pressure limit, labeled

with PO

, is shown in the right side of the

lower display

• maximum allowed depth based on the set

oxygen percentage and partial pressure limit

• current oxygen toxicity exposure shown

with an Oxygen Limit Fraction (OLF) bar

graph along the right side of the display.

In the Dive mode the current oxygen toxicity exposure

is always shown with an Oxygen Limit Fraction

(OLF) bar graph and the oxygen percentage labeled

with O

%. The current oxygen partial pressure labeled

with PO

is also shown, if selected (Fig. 3.22.). During

a dive, the oxygen partial pressure, labeled with PO

is always shown instead of the preselected display, if

the partial pressure is greater than 1.4 bar or the set

value (Fig. 3.23.).

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 121 122

No comments

Suunto MOSQUITO User Manual Page 49